Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Whitney, NV
Gate Installation in Whitney starts with the lot, not the gate. This is unincorporated Clark County land east of Las Vegas, where wide side yards, block walls and generous driveways call for swing and sliding gates sized to the opening in front of them – and where the desert heat, intense UV and dry air punish anything hung on posts that weren’t set deep enough. We’re a gate specialist, not a garage-door company that takes gate calls on the side. Our technicians have up to 8 years of experience, and they work on the operators and hardware that actually fail in Whitney’s climate. Call (844) 423-3067 for a free estimate.
Why Whitney Homes Are Different
Whitney sits in unincorporated Clark County, and that single fact shapes gate work here more than anything else. There’s no city building department to walk into – permitting and inspection run through Clark County – and there’s no tract-wide HOA design committee dictating what your gate can look like. What you get instead is block-wall and wrought-iron driveway and perimeter gates on large lots, built to secure a property rather than to match a neighbor’s color palette.
The housing stock reflects that: 1990s and 2000s stucco tract homes mixed with older ranch-style houses on generous lots along the Boulder Highway corridor, many with wide side yards that suit a swing or sliding driveway gate. A meaningful share of manufactured home parcels and rural-residential lots means non-standard gate openings and post footings show up as a matter of course. Add the monsoon dust storms that drive sand into track rollers, the near-zero humidity that dries out gate-post concrete, and the shallow caliche on lots near the Las Vegas Wash, and you get posts that heave and lean after a hard downpour. Technicians here rebuild footings deeper instead of just re-hanging the gate.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Whitney Services
Whitney homeowners call us about two things more than any other: a gate that has stopped working, and a gate that needs to be replaced or added from scratch. Each has its own page.
Gate Repair in Whitney
Repair in Whitney usually means heavy metal and block-wall gates that have lived through a decade of desert sun. Hinges seize, latches drift out of alignment, rollers flatten under the weight of a sliding panel, and welds crack at the frame corners. The UV and dry air do the slow damage; the monsoon dust does the fast kind, packing grit into tracks until the gate drags. When a gate leans, we check the footing before we touch the hardware, because re-hanging a gate on a heaved post just postpones the same call. Our technicians have up to 8 years of experience across these jobs. For Gate Repair in Whitney, start with a free estimate.
Electric Gate Repair in Whitney
Electric gate problems get diagnosed at the source here, not guessed at. A gate that opens partway and reverses, an operator that hums but doesn’t move, a remote that only works from ten feet away – each points somewhere different in the control board, the wiring or the operator itself. Whitney’s heat is hard on exterior control boxes and the electronics inside them, and dust finds its way into every enclosure that isn’t sealed tight. We work on LiftMaster, Elite, FAAC and the rest of the major brands, and we test the whole system rather than swapping a part and hoping. For Electric Gate Repair in Whitney, call for a free estimate.
Gate Installation in Whitney
Gate Installation in Whitney is mostly a question of matching the gate to a lot that wasn’t laid out with one in mind. Wide side yards, block-wall perimeters and rural-residential parcels mean non-standard openings are normal here, and the desert heat and dry air rule out hardware that can’t take years of sun. We handle the whole job, from measuring the opening to setting posts to proper footing depth and commissioning the operator. Our Gate Installation work covers both manual and automatic gates, residential and commercial.
Driveway Gate Installation
Signs you need it
You’re securing a wide side yard or a driveway with no gate at all, or the existing gate has rusted, warped or sagged past the point where repair makes sense.
What it costs in Whitney
Most driveway gate installations in Whitney run $2,500 to $6,500 for a single swing gate, with double swing and sliding driveway gates typically $4,000 to $12,000 depending on width, material and whether an operator is included.
How we do it
We measure the opening, check the grade and soil, set posts to proper footing depth, hang the gate, and align hinges, latches and stops so the panel swings or rolls clean without binding.
Automatic Gate Installation
Signs you need it
You’re tired of getting out to open a heavy gate, or the manual gate you have is too wide and heavy to swing comfortably by hand.
What it costs in Whitney
Automating an existing gate typically runs $1,200 to $3,500 for the operator and installation, while a full automatic gate installation including a new gate and operator usually falls between $3,500 and $9,000.
How we do it
We match the operator to the gate’s weight and travel, mount it to a solid post or pad, run the power and control wiring, and set the limits and safety devices so the gate stops and reverses as it should.
What Gate Installation Costs in Whitney
| Item | Typical range in Whitney |
|---|---|
| Single swing driveway gate, installed | $2,500 – $6,500 |
| Double swing or sliding driveway gate, installed | $4,000 – $12,000 |
| Gate operator and automation, installed | $1,200 – $3,500 |
| Full automatic gate, gate plus operator | $3,500 – $9,000 |
Can you install a gate on a non-standard opening in Whitney?
Yes. Non-standard openings are routine here, especially on manufactured home parcels and rural-residential lots. We measure the actual opening and build or size the gate to fit it, rather than forcing a stock panel into a space it wasn’t made for.
Do you handle the power run and the safety edges for an automatic gate?
Yes. We run the power and control wiring, mount the safety edges and photo eyes, and set the operator’s limits so the gate stops and reverses correctly. It’s all part of one job, quoted before any work starts.
Brands We Service in Whitney
We work on your brand, not just the ones that happen to be easy. That includes LiftMaster, FAAC, Elite, Mighty Mule, BFT, Linear, Viking, Ghost Controls and DoorKing. We don’t claim to stock parts for every one of them, but we know the quirks of each system. See our brands for the full picture.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Whitney, NV
| Service | Typical range in Whitney |
|---|---|
| Single swing driveway gate, installed | $2,500 – $6,500 |
| Double swing or sliding driveway gate, installed | $4,000 – $12,000 |
| Gate operator and automation, installed | $1,200 – $3,500 |
| Full automatic gate, gate plus operator | $3,500 – $9,000 |
Price in Whitney climbs with gate width, material weight, and how deep the footings have to go on caliche or a sloped lot near the washes. Every job is quoted per job, and the written estimate sets the final price – you agree to it before any work starts.
Neighborhoods We Serve in Whitney
We cover Whitney from the Boulder Highway corridor east toward the washes, including the older ranch lots and the newer stucco tracts in between. Reach out and we’ll confirm timing for your street.
- Boulder Highway corridor
- East Whitney near the Las Vegas Wash
- Rural-residential lots east of Whitney
- Manufactured home parcels off the main roads
Service Area – Cities Near Whitney
Whitney sits close to several communities we also cover. If you’re just outside Whitney’s boundary, we can still help in Sunrise Manor, NV, Winchester, NV, Paradise, NV and Nellis AFB, NV. Call and we’ll confirm coverage for your address.
Serving Whitney, NV – Our Local Coverage Area
We serve Whitney and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Whitney
We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Most Whitney calls get same-day service when you reach us during dispatch.
Because Whitney is unincorporated, permitting and inspection run through Clark County rather than a city building department. Ask the county about requirements for your specific project, and we’ll work to whatever the inspection calls for.
Much of Whitney is unincorporated land without tract-wide HOA gate rules, which is one reason block-wall and wrought-iron gates are common here. If your parcel does fall under an HOA, check its rules before we order materials.
Ready to get your Whitney gate sorted? Call (844) 423-3067 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. Every job is quoted upfront, and you’ll know the price before any work starts. Written by the team at Gate Repair Enterprise.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 60 minutes.
- 4You approve before work beginsNothing starts until you say go.
What Whitney Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Hector Hernandez"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Darnell Mosley"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Alejandro Rodriguez