Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Enterprise, NV
Enterprise is a young city, and its gates are showing their age. Most of the tract homes here went up between the 1990s and 2010s, which means the driveway gates and courtyard gates we see across Enterprise are mostly original builder-grade installs now failing at the operator, motor, hinge, or control board instead of at the ironwork. That changes the job. We’re a gate company in Enterprise, NV focused on installing new gates and repairing the equipment already on your property, and we work on the specific brands you already own. Call (844) 423-3067 for a free estimate on an install or a repair.
Why Enterprise Homes Are Different
Enterprise is a master-planned suburban edge city built almost entirely after 1990, so nearly every gate here is a single-generation installation now hitting its second decade of service. That means most of our work is first-replacement and component-failure repair, not restoration of old iron gates. The housing stock confirms it: stucco-and-frame single-family homes with side-yard RV gates, walled front courtyards, and HOA perimeter gates, typically 12 to 20 years old, on original openers and hinges. Many of those gates face south or west with little shade, which matters in a Mojave Desert climate that runs summer highs around 105 to 110°F with intense UV. Operators, control boards, and plastic hinges degrade faster here than in milder markets. Monsoon dust storms and wind gusts work hinges loose and pack sand into tracks and operator housings. And because many subdivisions back onto open desert wash and BLM land, rear pedestrian gates take constant wind-blown sand and occasional wash flooding, which is exactly where homeowners want security added. Much of the upgrade work follows HOA architectural rules rather than city code.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Enterprise Services
Enterprise homeowners and property managers call us most often about these two problems, and both are handled by technicians who work on gates exclusively.
Gate Repair in Enterprise
Most calls we get here are gates that worked fine for years and then stopped, sagged, or started dragging. On a 12-to-20-year-old Enterprise subdivision gate, that usually traces to worn hinges, a failing operator, or a control board cooked by afternoon sun on a west-facing wall. We diagnose the actual failed component before quoting, so you aren’t paying to replace a working part. Sand and dust pushed in by monsoon gusts also foul tracks and rollers, which can look like a motor failure when it’s really a travel problem. Our technicians have up to 8 years of experience. Call (844) 423-3067 for Gate Repair in Enterprise.
Electric Gate Repair in Enterprise
Electric gates fail at the electronics as often as the mechanism, and Enterprise’s heat accelerates that. Control boards and solar or loop sensors degrade faster on south- and west-facing walls with no shade, and we’ve seen plenty of openers that test fine on the bench but fault in the afternoon sun. We test the operator, wiring, sensors, and access controls together so the real fault gets fixed rather than guessed at. Gate systems from Mighty Mule and LiftMaster each have their own quirks, and we know them. Call (844) 423-3067 for Electric Gate Repair in Enterprise.
Gate Installation in Enterprise
Most of the gate installations we do in Enterprise are replacement jobs on gates that have reached the end of their service life. Because the city was built up after 1990, the original gates and openers from the 1990s and 2000s are now 12 to 20 years old, and many are failing at the motor or hinge instead of being worth another repair. We handle the full scope of Gate Installation from the initial measure through the finished gate, so a repair assessment that turns into a replacement doesn’t leave you sourcing a separate installer. The Mojave heat and UV drive the choice of components too: newer operators and control boards handle the 105 to 110°F afternoon highs far better than originals built for milder markets, and we specify for that. HOA architectural rules usually govern replacement, so we ask about those before ordering. Installation work is measured, ordered, and scheduled. We don’t promise same-day service on it. What you do get is a free on-site measure and a written price agreed before any work starts.
Automatic Gate Installation
Signs you need it
Your existing opener has failed multiple times and is older than the gate itself, or you’re adding automation to a manual driveway gate that came with the house.
What it costs in Enterprise
New automatic gate installations in Enterprise typically run $2,500 to $6,500 for a residential gate, with a written estimate fixing the price before work starts.
How we do it
We measure the opening and gate weight, confirm HOA requirements, select an operator rated for your gate, run the power and controls, and test the whole cycle before we leave.
Driveway Gate Installation
Signs you need it
The side-yard RV gate is sagging beyond adjustment, the hinges have pulled from the post, or the gate no longer clears the driveway when it swings.
What it costs in Enterprise
Driveway gate installation in Enterprise typically falls between $2,000 and $5,500 for a residential unit, depending on width, material, and whether power runs exist.
How we do it
We set posts to proper footing depth, hang and align the gate, mount the operator and safety edges if automated, then cycle-test for clearance and travel.
What Gate Installation Costs in Enterprise
A typical residential install follows the ranges below. Every estimate is written and agreed before work starts, and no work begins at a price you haven’t approved.
| Item | Typical range in Enterprise |
|---|---|
| Automatic gate installation | $2,500 – $6,500 |
| Driveway gate installation | $2,000 – $5,500 |
| Electric gate installation (with new operator) | $2,800 – $7,000 |
Can you install a gate that meets my HOA’s architectural rules?
Yes. We confirm the HOA’s rules on gate style, material, height, and color before ordering anything, since most Enterprise subdivision gates are governed by HOA standards rather than city code. That way the finished install matches what your community requires.
Do you handle the power run and the safety edges on a new electric gate?
Yes. Installation covers the power run, the operator, the safety edges, and the access controls, all tested together before we finish. Call (844) 423-3067 for a free measure and a written price on your install.
Brands We Service in Enterprise
Our technicians work on LiftMaster, Mighty Mule, FAAC, and BFT operators, along with the other major gate and access brands. We know the quirks of each system rather than guessing at a generic gate. Because gates here fail from heat and UV, turnaround usually depends on which part needs replacing. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Enterprise, NV
The ranges below reflect typical work in Enterprise. Heat and sand exposure here make operator and control board replacements more common than in milder climates, and the local pricing reflects that. The written estimate sets the final price.
| Service | Typical range in Enterprise |
|---|---|
| Automatic gate installation | $2,500 – $6,500 |
| Driveway gate installation | $2,000 – $5,500 |
| Electric gate installation (with new operator) | $2,800 – $7,000 |
| Gate repair (per visit) | $150 – $450 |
| Electric gate repair | $200 – $600 |
What pushes a job toward the top of a range in Enterprise: a south- or west-facing wall with no shade, which shortens operator life and can add a control board replacement, and a replacement gate that needs new posts or a new power run rather than reusing what’s there. We quote every job in writing and confirm the price with you before work begins.
Neighborhoods We Serve in Enterprise
We cover the whole of Enterprise, from the older subdivisions near the north end of the valley to the newer builds backing the desert wash. One response note for the area: our fast dispatch from 7am to 7pm runs Sunday through Friday, and gates near open desert wash or BLM land often need tracking work because of sand and wind exposure. Tell us where you are when you call and we’ll book you in.
- Southern Highlands-adjacent subdivisions
- Mountain’s Edge area
- Rhodes Ranch area
- Silverado Ranch area
- Blue Diamond and Windmill corridor
Service Area – Cities Near Enterprise
Enterprise sits in the southwest valley, and we also serve the communities around it. If your gate is in one of these nearby cities, the same gate-only specialists and the same written pricing apply. We cover Spring Valley, NV, Paradise, NV, Winchester, NV, and Henderson, NV. Call (844) 423-3067 and we’ll book you into the next opening in your area.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Enterprise
For repair calls we offer same-day service where the schedule allows, with fast dispatch from 7am to 7pm Sunday through Friday. Installation work is measured and scheduled after an on-site visit. We’ll tell you the real window when you call.
Most gate replacements in Enterprise are governed by HOA architectural rules rather than city code, so start with your HOA on style and material. For structural changes, ask the city’s building department about permits. We’ll confirm the HOA requirements with you before ordering any gate.
Yes. We serve all of Enterprise, including subdivisions near the desert wash and BLM land at the city’s edges, and the surrounding valley cities. The exact schedule depends on the day, and a free on-site measure gives you the written price. Call (844) 423-3067. We answer 24/7, and book calls into the next opening, Sunday through Friday, 7am to 7pm.
If your gate is stuck, sagging, or you’re ready to replace a failing operator, call (844) 423-3067 for a free estimate. We’re gate specialists, not generalists, and we work on the brand you already own. Our technicians have up to 8 years of experience, and we quote in writing before any work starts. Fast dispatch from 7am to 7pm, Sunday through Friday, and we answer 24/7.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 60 minutes.
- 4You approve before work beginsNothing starts until you say go.
What Enterprise Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Alejandro Rodriguez"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
- Travis Kowalski"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Hector Hernandez