Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Installation for Enterprise Homeowners
A gate that doesn’t close right or won’t open at all stops being a convenience and turns into a daily headache, especially on a property where the gate is your first line of access control. Gate Repair Enterprise is a gate-only specialist, which means every technician we connect you with works on gates and gate operators all day. Our technicians have up to 8 years of experience, and we handle the full lifecycle: gate repair, electric gate repair, and new gate installation. If your current gate has reached the end of its useful life, we can assess it and move straight into a replacement without sending you to a separate installer. For installation work we measure, order, and schedule, so you get a free on-site estimate and a written price before anything is ordered. Call (844) 423-3067 to book your estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Automatic Gate Installation
Automatic Gate Installation is the full job of fitting a new gate and pairing it with an operator so it opens and closes on a remote, keypad, or sensor instead of by hand. You need it when a manual gate has become a chore, when an existing automatic gate is bent or sagging past the point of a sensible repair, or when a property is being built out and the driveway needs controlled access from day one. We survey the opening, confirm which swing or slide direction fits the space, set posts to proper footing depth, hang the gate, and commission the operator. Automatic gate installation in Enterprise typically runs $2,800-$6,500 depending on span, material, and operator. The written estimate sets the final price.
Swing Versus Slide Operators
A swing operator suits a gate that pivots on hinges and needs clear space to arc open. A slide operator needs a straight run of track or a cantilever arm and gives you a tighter footprint along the fence line. We look at your driveway geometry and prevailing wind exposure before recommending one.
Access Control and Remotes
Every automatic installation includes at least one remote or keypad, and we can add exit loops or intercom wiring if the driveway needs them. We program the system on site and walk you through the controls before we leave. Nothing gets handed over untested.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Installation Services
Gate Installation Services covers everything from a single pedestrian gate to a full driveway replacement, quoted per job after we’ve seen the site. You need them when a gate is missing, damaged beyond economical repair, or when an existing opening has changed – a new fence line, a widened driveway, a property that’s been subdivided. We handle both residential and commercial work, and because we install and repair under one roof, a repair assessment that turns into a replacement doesn’t stall. Gate installation in Enterprise generally falls between $1,500 and $8,000 depending on material, width, and whether an operator is included. We quote before any work starts, so there are no surprises once the crew arrives.
Residential and Commercial Scope
Residential work usually means a driveway gate or a side-yard access gate, sized to a typical lot. Commercial installs are wider, heavier, and often need coordinated access control. We scope both the same way: measure, confirm clearances, then price.
Materials and Finish
Steel, aluminum, and wrought-iron-style gates all behave differently in desert heat, and heavier panels demand heavier hardware. We match the material to the span and the operator’s rated capacity rather than fitting whatever’s on hand. That’s what keeps a gate running years after install.
Electric Gate Installation
Electric Gate Installation is fitting a gate with a powered operator, control board, and safety devices so it can be opened by remote, keypad, or automatic vehicle detection. You need it when access has to be controlled without someone getting out to open the gate each time, or when an existing electric system has failed and the gate and operator both need replacing. We wire the power run, mount the operator, set the control board, and install safety edges and photo-eyes so the gate reverses if something’s in its path. Electric gate installation in Enterprise typically runs $3,200-$7,500 all in. The estimate you get on site is the price you pay.
Wiring and the Power Run
The power run is the part most homeowners underestimate – trenching, conduit, and getting power to the operator cleanly. We plan that route during the survey so there are no surprises once work begins. If your site needs an electrician for the supply side, we’ll tell you up front.
Safety Edges and Reversing Logic
Every electric gate needs safety edges, photo-eyes, or both, and we won’t commission a system without them. They’re the difference between a gate that stops for a child and one that doesn’t. We test the reversing logic twice before handover.
Driveway Gate Installation
Driveway Gate Installation is the specific job of fitting a gate across a vehicle entrance, sized and hung so it clears the driveway apron and swings or slides without catching the ground. You need it when you’re adding controlled access to a driveway for the first time, replacing a gate that’s been hit or has rusted through, or upgrading a narrow entry to something wider. We measure the opening, check grade and clearance, set posts to proper footing depth, and hang the gate to a proper reveal. Driveway gate installation in Enterprise runs about $2,200-$6,000 depending on width, material, and operator. We quote per job and agree it in writing before we begin.
Measuring the Opening
Grade, driveway slope, and post placement decide whether a gate clears the ground through its full swing. We take those measurements on site rather than working from photos. A gate that drags is almost always a measurement problem, not a hardware one.
Heavy Panels and Hinge Load
A wide driveway gate carries real weight, and hinges, posts, and operators have to be rated for it. A panel that’s too heavy for its hardware will sag within months. We size the supports to the gate, not the other way around.
Sliding Gate Installation
Sliding Gate Installation fits a gate that travels along a track or a cantilever arm instead of swinging open, which suits driveways where a swing arc would block a wall, a slope, or a parked car. You need it when space in front of the gate is tight, when the driveway sits on a slope, or when you want a wider clear opening than a swing gate allows. We set the track or cantilever base level, confirm the gate runs true through its full travel, and mount the operator to match. Sliding gate installation in Enterprise typically costs $2,800-$6,500. As with every install, the written estimate is what sets the final price.
Track and Cantilever Options
A ground track is straightforward and dependable but needs a clear, level run. A cantilever gate carries its own counterweight and avoids a track on the ground entirely. We recommend based on your driveway layout, not on what’s easiest to install.
Keeping the Gate on Its Run
Sliding gates fail most often when they come off the track or the rollers wear unevenly. A properly leveled base and correctly rated rollers prevent that. We check travel and alignment before we call the job done.
Gate Opener Installation
Gate Opener Installation is fitting the motor, control board, and access hardware that turns a manual gate into one that opens on command, and it’s the job you need when the gate itself is sound but getting out to open it has worn thin. We match the operator to the gate’s weight and swing or slide type, mount it, wire the controls, and program the remotes. We work with LiftMaster, FAAC, and BFT operators regularly and know where each one’s quirks show up during commissioning. Gate opener installation in Enterprise generally runs $900-$2,800 depending on the operator and whether new wiring is needed. The estimate is free and the price is agreed before we start.
Matching Operator to Gate Weight
An operator that’s undersized for the panel will strain, overheat, and fail early. We weigh the gate and check the operator’s rated capacity before recommending one. That single step heads off most premature failures.
Programming Remotes and Keypads
We program every remote and keypad on site and confirm each one triggers the gate reliably. If you want an exit loop or intercom tied in, we plan for it during the estimate. You leave with a working system, not a manual and a shrug.
Gate Fabrication
Gate Fabrication is building a gate to fit an opening that no off-the-shelf size will match, whether that’s an unusual span, a specific style to match existing fencing, or a heavier panel than a stock gate can offer. You need it when a standard size won’t fit, when the gate has to match surrounding architecture, or when the opening is wide enough that a catalog gate would flex. We fabricate to the measured opening, then hang and finish the gate as part of the same install. Fabricated gates in Enterprise generally run $2,500-$7,000 depending on material, size, and complexity. We measure first, quote in writing, and agree the price before any fabrication starts.
Custom Sizing to the Opening
An opening measured to the inch gets a gate built to that inch, which removes the flex and racking that comes from forcing a stock gate into a space it doesn’t fit. We take the measurements on site, not from a drawing.
Style Matching
If your property already has a fence or railing in a particular style, a fabricated gate can match it rather than clash with it. We look at the surrounding material and finish before we spec the panel. The gate should look like it belongs.
Brands We Service
Our focus is gates, and that focus includes knowing the equipment that drives them. We work on LiftMaster operators and know where their control boards and drive components tend to wear under heavy daily cycling. We also service FAAC and BFT systems, which show up on a lot of automatic gates, and we diagnose their specific fault patterns rather than swapping parts and hoping. If your gate runs on Mighty Mule equipment, we know the residential quirks that come with it.
Because we cover the full range of major gate and operator brands, you’re less likely to hear “we don’t work on that brand.” Whether you have LiftMaster, FAAC, BFT, Mighty Mule, Linear, Viking, Ghost Controls, DoorKing, or Elite, we can help. If your existing system has failed and a new install makes more sense than a repair, we’ll tell you plainly and quote both paths.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- The gate drags or scrapes the ground. A gate that catches the ground is usually a sign the posts have shifted or the hinges have worn. Left alone, it strains the operator and accelerates wear on the whole system, so it’s worth having checked before a small fix becomes a replacement.
- The operator runs but the gate doesn’t move. This points to a mechanical failure between the motor and the gate, or a drive component that’s given out. Continuing to cycle it can cause further damage to the operator, so stop using it and get it looked at.
- The gate reverses or stops mid-travel. Safety devices or the control board are usually behind this, and a gate that stops unpredictably is a genuine hazard. Don’t keep cycling it hoping it sorts itself out – get it diagnosed.
- Visible rust-through or bent panels. Structural damage to the gate itself can’t be tuned out with an adjustment. If the frame has rusted through or a panel is bent, the gate needs replacing rather than repairing, and we’ll say so honestly.
- The remote works only from close range. A weakening receiver or a failing antenna is typically the cause, and it’s a sign the control system is on its way out. Worth a look before it fails entirely and leaves the gate stuck.
Our Process, Step by Step
- 1
Free on-site estimate. We come out, look at the opening, the existing gate if there is one, and the power situation. You get a written price before anything is ordered or scheduled. No obligation, no pressure.
- 2
Measure and spec. We measure the opening to the inch, check grade and clearance, and confirm which operator suits the gate’s weight and swing or slide type. This is where a good install is won or lost.
- 3
Order and schedule. Once you approve the quote, we order the gate and operator and book the install. Installation work is scheduled, not same-day, because the materials have to be right.
- 4
Install and commission. We set posts to proper footing depth, hang the gate, wire the power run, mount the operator, and install safety edges and photo-eyes. We test the reversing logic and every remote before handover.
- 5
Walkthrough and handover. We show you how the system works, confirm the controls, and leave you with a gate that opens and closes the way it should. If anything needs adjustment, it happens before we’re done.
How Much Does Gate Installation Cost in Enterprise?
Gate installation in Enterprise broadly runs from about $1,500 for a simple manual pedestrian gate up to $8,000 or more for a wide automatic driveway gate with a new power run. A typical driveway gate installation in Enterprise runs $2,200-$6,000 depending on width, material, and whether an operator is included. A typical automatic gate installation runs $2,800-$6,500, and electric gate installation with full wiring and safety devices typically runs $3,200-$7,500. Gate opener installation alone generally runs $900-$2,800 depending on the operator and wiring needs.
What pushes the price up: a wide span, a heavy panel needing heavier hardware, a long power run requiring trenching and conduit, and access control extras like exit loops or intercoms. What keeps it down: a standard width, a lighter material, and power already close to the operator location.
To avoid overpaying, get a written, itemized estimate that separates the gate, the operator, the wiring, and the labor. Ask whether safety devices are included – they should be. Ask what happens if the opening turns out to need different footing than expected. A free estimate from us covers all of that, and the price is quoted and agreed before any work starts, so you won’t get an invoice bigger than the quote. Call (844) 423-3067 for an exact figure.
Our Service Area Near Enterprise
We serve Enterprise and the surrounding Las Vegas valley, including Enterprise, Summerlin South, and Winchester, plus Whitney, Nellis AFB, Spring Valley, Paradise, Henderson, Sunrise Manor, and Las Vegas. Installation work is measured and scheduled, so we book your on-site estimate and confirm the install date once materials are ordered. For repair work, we offer fast dispatch from 7am to 7pm, Sunday through Friday. We answer 24/7, and a call outside dispatch hours is booked into the next opening.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Installation in Enterprise
Gate installation is the full job of fitting a new gate to an opening, including setting posts, hanging the gate, and – if it’s automatic – mounting and wiring the operator, control board, and safety devices. It’s different from a repair, which fixes an existing gate, and from opener installation alone, which adds power to a gate that’s already in place. We handle all three, so the right fix gets recommended rather than the one that’s easiest to sell.
Most residential gate installations take one to two days on site once the gate and operator have arrived, though a wide automatic gate with a long power run can run longer. The timeline starts with a free estimate and a measurement, then material ordering, then the install itself. We confirm the schedule with you before we book, so you know what to expect.
Gate installation in Enterprise typically runs $1,500-$8,000 depending on gate size, material, and whether an operator is included. Automatic and electric installs usually land in the $2,800-$7,500 range once wiring and safety devices are factored in. Every job is quoted per job after we see the site, and the written estimate sets the final price. Call (844) 423-3067 for an exact quote – estimates are free.
Yes, we service LiftMaster operators and install them as part of new gate systems. We also work on FAAC, BFT, and Mighty Mule equipment, along with Linear, Viking, Ghost Controls, DoorKing, and Elite. Because we cover the full range of these brands, we’re not going to turn you away because of the make on your gate.
Same-day service is available for repair calls, while installation work is measured, ordered, and scheduled. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Warranty terms depend on the gate and operator manufacturer’s coverage and the specifics of your install, and we’ll go over them with you as part of the written estimate. We don’t state a blanket warranty we can’t stand behind. Ask during the estimate and we’ll spell out exactly what’s covered.
Clear vehicles and obstructions from the driveway and the gate opening before we arrive, and make sure we can reach the power source. If you have HOA or city requirements for gate style or setback, have those documents ready so the measurement accounts for them. Permits are often required for gate and operator work, so check with your city’s building department before the install date.
Schedule Your Gate Installation Service in Enterprise Today
Whether you need a new automatic gate, a driveway replacement, or an opener fitted to a gate that’s already sound, we’ll measure it, quote it in writing, and schedule the install. The estimate is free and there’s no obligation. Call (844) 423-3067 to book. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Gate Repair Enterprise.